Thursday 13 August 2015

BLACKBERRY 9800 INSERT SIM CARD JUMPER SOLUTION

BlackBerry 9800 Sim Card Ways Ic Jumper Solution

BlackBerry 9800 Sim, Solution, Jumper, Problem, Ways, Sim Card Solution
Hardware method to solve BlackBerry Torch 9800 No Sim Card Problem. which is known to be one of the most successful phone of Samsung. Normally BlackBerry 9800 doesn’t encounter much problem, but if it does there is always a solution.
BlackBerry Torch 9800 Insert Sim Problems
Insert SIM card error.
Phone book inaccessible.

Reasons for BlackBerry Torch 9800 Insert sim Problems
It might be due to dust on SIM Jacket contacts.
SIM power line might be faulty, if it happens then it doesn’t show SIM card.
It might be due to faulty capacitors. They are total 4 in numbers, if any one of them is faulty then it will affect your overall SIM card function.
Issue might also be due to SIM card IC.

Hardware Procedure to solve BlackBerry 9800 Insert Sim Problem

NOKIA 108 POWER KEY JUMPER

NOKIA 107 INSERT SIM JUMPER

ALIYU A GITAL

Nokia -108 NO SERVICE SOLUTION

ALIYU A GITAL

BLACKBERRY 8520 RINGER JUMPER

ALIYU A GITAL

NOKIA ASHA 206 CHARGING POINT JUMPER

gitalgsmvillage.blogspot.com

Monday 25 May 2015

Advance Turbo Flasher (ATF Box) is a highly professional and time-saving solution for Nokia cell phone servicing.
Advance Turbo Flasher (ATF Box) Software Features
High speed turbo flash
New protocol devices Lumia, Window phones etc. and all Rapuyama Fbus flash
Tuning and Maintenance
Life Timer Tuning (reset/write life time)
Factory Reset
Warranty Edit
Production Data Edit
Read/write camera configuration
IMEI and locks
Safe unlock by means of code calculation (Supports SL1 SL2 and some SL3 models)
Unlock / Relock using RPL method
Super Dongle key repair
PM (Permanent Memory)
Read/write permanent memory using SX4 Server
Phone Test (self-test)
Bonus Material:
Free Preview of ATF Professional eMMC Tool 3.0 (APeT 3.0)
Removes Permanent WP Bit on ALL Samsung Brand eMMC (First in The World)
Fixes “Unable to find a bootable Option.” on Nokia/Microsoft Lumia Phones (WITHOUT IMEI AND SIMLOCK DATA LOSS)
Fixes “eMMC is Read Only you cannot update your System” on Huawei Phones (WITHOUT IMEI AND SIMLOCK DATA LOSS)
Field Firmware Update on Selected Samsung Brand eMMC
Fully Repairs eMMC Firmware Bugs such as:
No Name eMMC “000000” Bug
Read/Write Disabled Bug
eMMC Firmware Erased/Corrupted Bug
Currently Supported Samsung eMMC Models for Field Firmware Update (FFU)
Release Date: May 19, 2015
Firmware Version Required : 11.0.10 or 11.0.12
ATF Box USB Driver Required: 2.10.0.0 – Windows 7/8/8.1 (32-bit and 64-bit)
ATF Box USB Driver Required: 2.8.30.0 – Windows XP (32-bit and 64-bit)
ATF Plus eMMC Tool 4.0 (PRO)
Introducing ATF Drive !!! 100% FREE FOR ALL ATF BOX USERS
D.R.I.V.E. = Data Recovery Interface Via EMMC
First In the World Solution that will MOUNT eMMC Partitions as a Windows Removable Disk!
Now you can Recover Data from a Dead Phone by Simply using Windows Explorer “Search” and “Copy + Paste”.
Special Features:–> Supports Windows XP, Vista, 7, 8.0 and 8.1 (All 32-Bit and 64-Bit Versions)–> You can load Partitions via Direct ISP eMMC Connection (4 wires + Vcc/VccQ) or via eMMC Binary Dumps–> Supports FAT12, FAT16, FAT32, exFAT, NTFS Windows Phone Partitions–> Supports EXT2, EXT3 and EXT4 Android Partitions (1)–> You can READ + WRITE to Mounted Partitions as if they were USB Drives on your PC! (2)–> Supports Recovery of Windows Phone 8.0/8.1/10 DATA Partition EVEN if MBR, GPT and BOOTLOADERS are ERASED!–> Faster READ/WRITE Speeds when compared with other Products
–> Supports MBR + GPT Partitions of Android and Windows Phones

Sunday 24 May 2015

Nokia asha 206 mmc, memory card Not working solution

Now I share about nokia asha 206 phones mmc not work problem.May be has many reason for mmc not support they are memory card corrupted , memory card not formatted or mobile phone hardware problem. Now I showing how to repair nokia asha 206 mms not found hardware problem

put a good memory card and see gallery if memory card not found then first check memory detect if memory card not detect replace mmc ic with another one.

Saturday 23 May 2015

Nokia 210 mic jumper

Android multi tool software

Store the working conditions.
First, the Driver must be installed on the computer system before then.
This program works with any device that is an Android.
Requires root and open the Debug mode or fast boot mode.

1-6 commands can be used with the open marriage Debug Mode only.
7-9 can be used with the machine that faithful into Fastboot Mode only.

Profile commands.
1.Check Device used to check the connection of the machine mode ADB.
2.Reset User Lock Code using the tools that are in the data is not lost.
3.Reset Gesture Lock machines that are used to draw a line through the data is not lost. After the installation is complete, it will fire up. Then draw anything for a closed lock.
4.Reset GMail using the machine to try to unlock the machine several times to enter to unlock.
5.Wipe Data used to resolve the symptoms or slow down. Or that an error or some missing.
6.Reboot to reboot your PC or from adb shell.
7.Check Device On Fastboot Mode to check the connection of the machine mode FastBoot.
8.Wipe Data / Cache On Fastboot Mode This command is available only Fastboot Mode to resolve the symptoms or slow down. Or that an error or some missing. That is often found in the CPU Spreadtrum.
9.Exit Fastboot Mode to reboot your PC or exit FastBoot.
0.Go To Command Promt for entering DOS commands to listen to Dua. And can return to the main program by listening to exit.
S.Software Info about over the phone to Verizon's length. What is the CPU.
H.Hardware Info used to determine the IC number on the air as I inch LCD touch screen. Camera Control IC number. Hardware, and so on.
R.Report / Contact Me links to the specific problems of the Phase I program and a bookmark.
D.Driver Download for loading the drivers in case that you do not have the driver installed in the router's Purse.
after read all this instructions see the interface of the software below

Help.
Press the number that corresponds to the condition of the machine and then hit enter.